Products
SDA Series

●  Adoption of DSP chips greatly accelerate the speed of data acquisition and processing.

●  Adoption of IPM power device decreases the volume of the driver.

●  Monitor function surpports displaying 24 parameters of their state.

●  Two input control modes : pulse position and simulation speed.

●  High speed high precision: max rotate speed up to 3000rpm Positioning accuracy: 1/10000 rev.


Drawing Download

PDF CAD 3D
Features

●  Adoption of DSP chips, greatly accelerate the speed of data acquisition and processing.

●  Application of large-scale array circuit improves the reliability.

●  Adoption of IPM power device decreases the volume of the driver.

●  Monitor function surpports displaying 24 parameters of their state.

●  Two input control modes : pulse position and simulation speed.

●  Concise appearance and compact structure.
 

Performance

●  High speed ratio, constant torque: speed ratio is 1: 5000

●  High speed, high precision: max rotate speed up to 3000rpm, Positioning accuracy: 1/10000 rev

●  Output power: 0.2~2.2KW

 

Application

●  CNC machines:engraving machine, milling machine, coiling machine, sparking machine, wire-electrode cutting, flying shears equipment...

●  Electronic equipments : upcoiler, stripping machine, lithium battery production equipment, dispensing machine, Ceramic equipment...

●  Packaging equipments: filling machine, fixed length cutting machine, tissue paper machine, paper diaper equipment...

●  Textile equipments: flat knitting machine, hosiery machine, round edge machine, embroidery machine, spinning machine, knitting machine...

●  Printing equipments: screen printing machine, printing machine, pad printing machine...

●  Laser equipments: carving machine, cutting machine, abeling machine...
 

Technical Parameter

 

Servo driver model

SDA06-MF20-□□□

SDA10-MG20-□□□

Power supply

Single / Three phase

AC220V(-15%~+10%)50~60Hz

Controlling principle

Attains the PWM control by adoption of AC sine-wave control and optimal PID control

Feedback signal

Incremental encoder 2500ppr with U/ V/ W signal control

Position output signal

Available to set the electronic gear output of pulse rate, and Z-Phase open-collector output

Protection function

Over-current, short circuit, overload, over / lack, voktage of main circuit, Abnormal braking , Abnormal 

encoder, overspeed, position error, etc

Control mode

position control, speed control, trial run,JOG run

Regenerative braking resistor

Built-in (60W,40 ohms)

Characters

Speed frequency

response

200HZ or more

Speed fluctuation

<0.03(load fluctuation 0~100%);<±0.02(power fluctuation -15~+10%)

Speed ratio

1:5000

Pulse frequency

≤500kHz

Input control

① servo on ② alarm reset ③ clock wise rotation drive prohibited ④ counterclockwise drive prohibited 

⑤ error counter clear / internal speed selection ⑥ pulse command prevented / internal speed selection 

⑦ multifunctional input port1 ⑧ multifunctional input port2

Output control

servo ready, servo alarm, positioning finished / speed reached

Position control

Input mode

pulse command + symbol, clockwise pulse / counterclockwise pulse, 2 phase orthogonal instruction pulse

Electronic gear

1~32767/1~32767

Feedback pulse

10000p/r

Speed control

external command / 4 internal speed control

Acceleration / Deceleration control

parameter setting 1~10000ms / 1000r/min

Monitoring function

speed, current position, position command, position deviation, motor torque, motor current, linear speed,

position control, pulse frequency under position command、running state

Operation

LED digital tube, keystroke

Weight

2kg

Service ambient

Temperature

Working environment:0~50℃  storage environment:-20℃~65℃

Humidity

<90%(No condensation)

Altitude

≤1000meters

Vibration

0.5G or less(4.9m/S2a), 10~60Hz(not continuous running)

※ Please discuss with us or our agents if there is any other special requirements. 
 

Features