News
Company News Industry News

Anshan accident reminders or level of automation equipment, coking robot again

Time:2011-02-26 10:22

   February 21st, Anshan, Liaoning. 20, 23:30, Angang's Heavy Machinery Co., Ltd. cast steel casting in casting workshop, a large steel casting near the end, explosion accident occurred, the accident caused directly caused 13 deaths, 17 people were injured, the families of the victims caused irreparable harm. Prior to the January 31, 2011 subsidiary of Angang Yukui release 2 billion 151 million yuan, Anshan opened in 2012 on the occasion of this tragic accident, it is one disaster after another. I do not know whether the main leaders of Anshan mianbisiguo? Some experts suggest that Anshan Iron and steel company should increase the introduction of automation equipment, increase operation robots, and reduce the staff directly facing dangerous equipment.

 

   The impact of the accident can not be ignored, Anshan Iron and Steel shares continued to fall in 21 days, up to 1.88%, as of 14:55, Anshan Iron and Steel shares fell 0.63%, reported 4.77 yuan. Earlier insiders pointed out that the huge loss of nearly 2 billion 200 million yuan in Anshan last year exposed the existence of loopholes in management.

 

   Comprehensive shutdown and investigation of cast steel plant

 

   The explosion accident in the foundry shop of Anshan Iron and steel company is a concern.

 

   In the afternoon of February 21st, the accident unit held a conference on the situation and treatment of the injured. Liu Yi, director of the medical operation and Management Department of Anshan public hospital, reported the basic situation and treatment of the injured.

 

   Liu Yi said that the "220" explosion accident at present caused 13 deaths, 17 injured, 6 serious injuries, 2 burned area of 100%. Among them, 17 of the injured were male, aged from 20 to 51 years old, mainly with burn. From the early morning of 21, Anshan has organized all the wounded to enter the First Affiliated Hospital of China Medical University, Anshan hospital.

 

   It is understood that the cast steel plant has been completely stopped in accordance with the requirements of the accident investigation in order to prevent the occurrence of a safety accident during the investigation.

 

   But for the cause of the accident, such as the related issues, Liu Yi did not give the media to answer the meeting.

 

   In response, Song Jia Chen, the news center of the accident handling group, explained to reporters that the accident is introduced to you now. "The reason for the accident is to be investigated by the Provincial Safety Supervision Bureau and the provincial Party committee investigation team. Now enterprises can't take part in this matter".

 

   Song Jiachen said, Liaoning province Safety Supervision Bureau, Liaoning provincial government has set up a special accident investigation team, the cause of the accident to the accident investigation team issued opinions, it is still under investigation, it is estimated that two days can come out.

 

   In addition, Anshan Iron and Steel Group in 21 at 11:51 on the opening of the official micro-blog, and then issued two information about the accident. "The opening of micro-blog, we hope that everyone in time to understand the progress of the accident, we will continue to update information." Song Jia Chen said.

 

   Insiders directly refer to the management loopholes in Anshan Iron and Steel Company

 

   Media quoted the scene personnel as saying that they were casting a circular steel piece at that time, the mold used was a sand mold with an outer diameter of about 10 meters, and the sand mold cavity was also filled with sand and gravel, leaving a circle of molten steel in the middle to form the ring. It was not expected that the casting was about to end, and the last of the last molten steel was about to fall into the sand, and the inside of the sand was burst.

 

   In addition, Anshan Iron and Steel Group in 21 at 11:51 on the opening of the official micro-blog, and then issued two information about the accident. "The opening of micro-blog, we hope that everyone in time to understand the progress of the accident, we will continue to update information." Song Jia Chen said.

 

   Insiders directly refer to the management loopholes in Anshan Iron and Steel Company

 

   Media quoted the scene personnel as saying that they were casting a circular steel piece at that time, the mold used was a sand mold with an outer diameter of about 10 meters, and the sand mold cavity was also filled with sand and gravel, leaving a circle of molten steel in the middle to form the ring. It was not expected that the casting was about to end, and the last of the last molten steel was about to fall into the sand, and the inside of the sand was burst.

 

   In addition to the industry's general problems, the industry points out that the reasons for the performance of Anshan Iron and steel company are also under management. "Because the cost of iron is mainly reflected by raw materials, and the cost after iron is mainly reflected in management level and product quality. Part of the reason for the cost increase is that there are loopholes in management (process cost). Media reports said.

 

   For all kinds of analysis and speculation about accidents, Song Jiachen said he was not very clear about the technical problems of steel plants, and can not easily draw conclusions now.

 

   Anshan Iron and steel company has not been responsible for management

 

   Previously, the safety committee of the State Council has issued the "measures" to supervise the handling of major accidents, major accidents in production requires a one-time death of more than 9 by the safety committee of the State Council to supervise the handling of major accidents; one-time death below 9 people and 3 people and more than 3 people by the provincial security committee supervise the handling of the accident investigation, the link information to be published in the mass media.

 

   Statistics show that the steel casting plant of Angang Heavy Machinery Co., Ltd. was built in 1936, mainly producing three leading industries, including metallurgical industry, power generation industry, mining and complete sets of equipment. In 2003, Angang machinery manufacturing company was officially transformed into a non state holding limited liability company, of which Anshan Iron And Steel Group Corporation held 49%, and the employee stock ownership was 51%.

 

   Anshan Iron and Steel Group, on the same day, said that it has not yet made a decision on the management level of the accident.

 

   This company is the two level company of Anshan Iron and Steel Group, which has nothing to do with the joint stock company. " On the same day, the industry personage who did not want to be named, told the reporter. How to handle the matter will be responsible for the accident, how people will be held accountable, of course, China always have this habit, is active when a leader, had the responsibility to push each other. Some experts suggested that Anshan Iron and Steel Co., Ltd. in the future, producers need to strengthen production automation, rationing more robot operation, reduce personnel directly facing the extremely dangerous equipment, and ensure personal safety of employees.